Table of Contents
We all are looking to add a personal touch of style to our homes without paying for an expensive custom makeover. Spray painting furniture with spray gun is an easy and cost-effective way to dramatically transform ordinary pieces of furniture. We’ll show you how to spray paint furniture with spray gun in simple steps required to successfully paint any piece of wooden furniture.
A paint furniture spray gun is a tool that uses compressed air to atomize and spray paint onto surfaces. Paint furniture spray guns come in a variety of shapes and sizes, but they all have the same basic parts which are: flat, round and fan. The most important part of the paint furniture spray gun is the nozzle. The nozzle is what controls the size and shape of the paint droplets that are sprayed onto the surface.
To get started, you will need a paint furniture spray gun, some paint, and a compressor. You will need to have a well-ventilated area to work in because paint fumes can be dangerous. You will also need to prepare your furniture by sanding it down and removing any old paint or finish. Once your furniture is prepared, you can start painting.
How to Spray Paint Furniture With Spray Gun
When you are ready to begin painting, make sure that you are wearing protective clothing. This is because paint fumes can be harmful, so it is important to wear a respirator or mask when you are working.
Tools You Will Require
How to Spray Paint Furniture With a Spray Gun-Step by Step
Step 1: Safety and furniture preparation on how to spray paint furniture with spray gun
Before you start, make sure you’re wearing the proper safety gear including a respirator or mask to avoid inhaling paint fumes. Paint fumes are harmful because they contain VOCs (volatile organic compounds). These are chemicals that can cause health problems like headaches, nausea, and dizziness.
You also need to put on your gloves to protect your hands from the paint.
Next, seal off anything and every portion of your workstation from paint overspray. A painter’s plastic is required for this.
You should tape down the painter’s plastic to prevent it from flying about. The Wagner pop-up tent is a fantastic substitute for the painter’s plastic. You’re almost ready to go once you’ve set it up.
Prepare your furniture
Now that you’re all set up, it’s time to prep your furniture. This involves sanding down the surface to remove any old paint or finish. You should also wipe down the furniture with a damp cloth to remove any dust until the surface is smooth. To help the paint to adhere evenly. You can use a hand sander or an electric sander to make this job easier.
Related Article: How To Remove Paint from Vinyl Plank Flooring
Wood-rated Tips on How to Spray Paint Furniture with Spray Gun
If you’re painting chairs with cushions, start by removing the cushions. If you can’t, do your best to keep them free of paint spray.
Also, if your wood furniture has delicate antique hardware on it, such as handles, hinges, and knobs, unscrew them and put them in a separate container. This ensures that they won’t get in the way of your painting.
If you find them difficult to remove or you just don’t want to go that distance, seal them off with a painter’s tape or any masking tape accessible.
Step 2: Prepare the Paint and Spray Equipment
Choosing a spray paint color to use o your wood furniture depends on how much interaction it will be subjected to by the public. If it’s a piece that will be in constant use, like a coffee table or dining room chair, you may want to choose a paint color that is more durable and can withstand repeated cleaning.
You can also add a topcoat to your paint to make it more durable and resistant to scratches and stains.
If you’re painting an accent piece or something that doesn’t need to be as tough, you can choose a paint color that is more delicate.
To begin, set up your air compressor and paint furniture spray gun according to the manufacturer’s instructions.
Fill the cup with your chosen paint color. If you’re using a latex-based paint, you will need to add water to thin it out. The ratio of paint to water will depend on the paint brand you’re using, so be sure to read the instructions carefully.
Once your paint is mixed, test it out on a piece of scrap wood or cardboard to get a feel for how it sprays. This will also help you determine if you need to thin the paint out further.
Step 3: Priming furniture
Using a primer binds the paint to the surface of your furniture and helps it to last longer.
To prime your furniture, simply apply a layer of primer with your paint sprayer and let it dry according to the manufacturer’s instructions.
Once the primer is dry, you’re ready to start painting.
Rinse the Paint Sprayer
You need to rinse the paint sprayer thoroughly using water and paint thinner after each use.
To do this, first remove the cup and unscrew the nozzle. Next, disassemble the air cap and clean all the parts with paint thinner.
Reassemble your sprayer and connect it to an air compressor. Turn on the compressor and hold down the trigger until only water is coming out of the nozzle.
Once you’re finished, turn off the compressor and disconnect your paint sprayer.
Step 4: Spray Painting on how to spray paint furniture with spray gun
Now for the fun part – it’s time to start spray painting your furniture.
Start by holding the paint sprayer about 12 inches away from the surface of your furniture. Slowly move the sprayer back and forth as you work your way around the piece.
Be sure to keep a consistent hand movement and overlap each stroke by 50%. This will help to ensure that the paint is applied evenly.
If you need to, you can use a brush or roller to touch up any areas that you may have missed.
Once you’re finished, let the paint dry according to the manufacturer’s instructions.
And that’s it, you’ve now successfully painted your furniture using a paint sprayer
Step 5: Finish your project
Let the topcoat cure for two to four weeks before using it. To remove any air bubbles or lumps on the painted furniture, sand it lightly. Decide on a finish sealer to use on your furniture.
The most popular option for finishing furniture is to apply polyurethane or a transparent wax coating. Following the same procedure on how to spray paint furniture with spray gun, you may spray water-based polyurethane on your furniture.
If you want to use wax, carefully apply it with a lint-free cloth over the painted surface, especially if you used chalk paint for your furnishings.
Frequently Asked Questions (FAQs)
Which is the Best Paint for Furniture-Spraying?
The best paint for furniture spraying is the one that suits your project’s needs. If you need a durable and long-lasting paint, choose an oil-based enamel paint.
How Long Does It Take for Painted Furniture to Dry?
It usually takes about 24 hours for the paint to dry completely. However, it is always best to check the manufacturer’s instructions to be sure.
What Is the Best Way to Clean a Paint Sprayer?
The best way to clean a paint sprayer is to disassemble it and clean all the parts with paint thinner. You can also rinse it thoroughly with water and paint thinner after each use.
Which is the Best Primer for Furniture?
Primer come in different forms however, when it comes to picking the best one for your furniture, it really depends on the type of paint you will be using. If you are using chalk paint, then an latex primer would be a good option. For oil-based paints, an oil-based primer is ideal. Whichever kind you choose, make sure it is meant for use on furniture.
Are You Allowed to Use Spray Poly With a Paint Sprayer?
Yes, you can use spray poly with a paint sprayer. In fact, it is a great option for finishing furniture as it is durable and long-lasting. Just be sure to follow the manufacturer’s instructions carefully.
How Do You Thin Enamel Paint for Spraying?
Enamel paint can be thinned by adding a thinner or by adding water. However, it is always best to check the manufacturer’s instructions to be sure.
Can You Use a Paint Sprayer Indoors?
Yes, you can use a paint sprayer indoors. Just be sure to open all the windows and doors for ventilation and wear a mask to avoid inhaling any fumes. Also, be sure to cover any areas that you don’t want paint on.
What is the Best Way to Avoid Paint Splatters When Using a Paint Sprayer?
The best way to avoid paint splatters is to wear old clothes that you don’t mind getting paint on. You should also cover any areas that you don’t want paint on with a drop cloth or plastic sheeting. Finally, be sure to hold the paint sprayer at a consistent distance from the surface to avoid any drips or splatters.
Is Chalk Paint Allowed in a Sprayer?
Yes, chalk paint is allowed in a sprayer. In fact, it is a great option for painting furniture as it gives a nice distressed look. Just be sure to follow the manufacturer’s instructions carefully.
When Can You Paint and When Can You Wash Furniture?
The best time to paint furniture is when the weather is warm and dry. If you’re painting outdoors, make sure there’s no chance of rain in the forecast. You’ll also want to avoid painting in direct sunlight, as this can cause the paint to dry too quickly and create a patchy finish. If you’re painting indoors, choose a well-ventilated area to work in.
Whether you’re painting furniture for the first time or you’re a seasoned pro, there are a few things to keep in mind when it comes to spraying paint. First, always start with a clean surface. This means sanding down the piece of furniture and removing any dirt or debris. Next, you’ll need to choose the right paint. There are a variety of paint types available, so be sure to select one that’s appropriate for the type of furniture you’re painting. Finally, always use a primer before applying paint. This will help the paint adhere to the surface and create a smooth finish.